VT2000 System Hardware Components | OVERVIEW

System Packages

 

All of the System Packages Includes the Core System Modules – Expand System by Only Adding Input Modules

 

Communications & Downtime System [CDS] - $4,995

Shop Floor Performance System [SFPS] - $6,495

Advance Shop Floor Performance System [ASFPS] - $10,500

More Information Click Here

 

Core System Modules  

 

Standard Control Unit

Standard Control Unit

Standard Control Unit: dual raid drives, supports up to 6000 monitoring points. Software is built on Microsoft's .NET technology, choice of an SQL or Access database.More
Mini Control Unit

Mini Control Unit

Mini Control Unit supports up to 1000 monitoring point and can be expanded.  Software is built on Microsoft's .NET technology, choice of SQL or Access database. More
Receiver/Coordinator

Receiver Coordinator - VersaCall Technologies

Receiver/Coordinator receives and captures wireless transmissions from the input modules and passes the information to the VT2000 Control Unit. Receiver /Coordinator module is integrated with the control unit. Only one receiver coordinator module is typically required per system. More
Repeater

Repeater - VersaCall Technologies

The VersaCall repeater amplifies transmission from the input module encrypted transmitters while ignoring background noise. This repeater is perfect for large facilities such as multi-floor buildings, multi-building sites and other open-air installations. Virtually any number of repeaters can be added to a system, scaling the system size as needed.  No wiring – power is required. More

 

Input Modules

 

Call Station

Call Station

Wireless 4 Button Call Station whose applications are primarily for communications and downtime capture. Two models are available (CS120 and CS130). Battery powered versions are also available. Four configurable buttons provides for the essential communication of critical issues. System automatically captures and documents response time to support requests.

More Specs

 

Reason Code Module

Reason Code Module

Reason Code Module is completely programmable with capacity of over 70 line items of information. Module provides factory floor communications, production output counts, automatic downtime capture and downtime by reason code.

More Specs
Data Input Modules

Data Input Module

Data Input Modules capture a broad spectrum of production performance information by employee, production run, part number and performance to standards. This Module can be programmed to separately capture set-up and production run information. For ease of data capture, the module comes with an integrated key pad supports bar code scanners and magnetic card readers. The Data Input Module is engineered to eliminate manual data collection on the production floor.

More Specs
Takt Time Module

Takt Time Modules

Takt Module is used in assembly line systems. The module if designed to signal the advance of the line, pause of the line and the extension of the production period. One module is used per assembly line.
Assembly Module

Assembly Module

Assembly Modules is a simple easy to use module with only two inputs. Captures assembly station performance and status. Provides critical performance information - Assembly time, cycle time, total quantity produced, total quantity rejected as well as operator performance to standards.

More
Switch Contact ModuleSwitch Contact Module The Wireless Switch Contact Module (WSCM) is the perfect device for monitoring equipment with no human interface. Track downtime as well as monitor sensor thresholds.
Machine InterfaceMachine Interface The Machine Interface Module provides an optically isolated interface between production floor equipment and the Data Input and Reason Code Modules for accurate  and consistent data capture .
Input Module EnclosureInput Module Enclosure Sealed outer enclosure with a clear front and easy to open cover for protecting input module in wash down required production environments.

 

Output Modules

 

Integrated Stack Lights

Input ModulesInput Modules

The VersaCall input modules are designed to integrate with stack lights. Up to 5 different colors are available. These lights can be programmed to either flash or go solid on initial input and change states when the input is repeated. There are 2 standard lengths of poles available, 1’ or 3’. If your application requires a different length this can be accomplished via conduit. The diameter of the lights can range from 60mm to 100mm.
Wireless Stack Lights

Wireless Stack Lights

Wireless Stack lights offers the same abilities as the lights attached to the modules, with the flexibility to be placed anywhere. This offers you option to have your input modules placed in your production area, and your lights placed for clear viewing by responding personal.More
Wireless Audio Module

Wireless Audio Module

This module allows audio messages to be played for specific inputs. The audio outputs are completely programmable with up to 4 sounds, tones, or music. You also have the ability to play these with varying time durations. Two different versions are available. One version allows for the files to be loaded via a SD card, the other through a programmer and is tamper proof.More
Wireless Controls Module

Wireless Controls Module

This allows for remote control of equipment, lights, gates and audio. 4 outputs are available. Supports the wireless activation of relays and switch contacts.

 

Communications Modules

 

Two Way Radio Module

Two Way Radio Module

Two Way Radio Module transmits pre-recorded audio messages to existing 2 way radios. Comes in both UHF and VHF versions and supports up to 8 separate channels. Transmitter is integrated with the VT2000 Control Unit and you are able to have both on-site transmissions and 2 way radio transmissions in one system. Integrates with the VT2000 System.  More
On Site Paging System

On Site Paging System

Onsite paging system allows alpha /numeric notification to onsite pagers.  One paging systems covers an entire site. Integrates with VT2000 System.  On-site pages sold separately. More

 

Other Components

 

RS232 to Ethernet Interface

RS232 Ethernet Interface

RS232 to Ethernet support the flow of data from LAN connected locations back to the Control Unit.  This provides the capability for the one system to support multiple buildings or sites.